The basic material of our HSS woodturning tools is high-alloy WOLFRAM-MOLYBDEN-STEEL, manufactured by experienced master blacksmiths. High-performance high-speed steel has decisive advantages over conventionally hardened tool steel:
Tempering resistance: burning is almost impossible during grinding
High hardness value: good edge retention even with hard woods and high turning speed
High wear resistance: The service life of the cutting edge compared to conventional tool steel is at least 6 times higher.
HSS WOOD TURNING TOOLS
WITH ALDER WOOD HANDLE
working range hardness HRC 63
optimum cutting edge retention
blade fi ne polished, made of HSS steel
steel clamp
STUBAI guarantees the highest quality
handle made of alder wood, ergonomically shaped, unvarnished
end cap
BASIC HEALTH AND SAFETY INSTRUCTIONS
Special care is required for eyes and lungs. Always use protective glasses and dust masks!
Keep loose clothing and hair away from the lathe!
Do not start the lathe if you are under the infl uence of alcohol or drugs!
When you switch on the lathe, always start at a low turning speed!
Always use the appropriate tool for the particular job!
Make sure that the wood is well fi xed before you start the lathe!
Never try to move the wood while it is turning!
Never try to move the wood while it is turning!
Always keep your workplace clean!
Do not leave any shavings on the fl oor, as these are not only slippery but can also burn easily!
